802.16: A Look Under the Hood - Page 3
August 26, 2003
802.16 vs. 802.11
It is natural to ask whether 802.16 will replace or compete with 802.11. This question will become even more pertinent once the 802.16 working group completes its work on mobility. Assuming the ratification of a standard for 802.16 mobility and good non-line-of-sight operation inside buildings, which standard should you use, or both?
802.11 is rapidly becoming established. It is cheap and easy to install, and its well-publicized problems with security are being addressed. 802.11 is normally deployed using a hotspot approach. Hotspots are chosen to provide the desired campus coverage. The access points are then attached to the corporate LAN backbone.
In comparison, there are a variety of enterprise network architectures that can be implemented using 802.16. The technology could simply connect campuses to each other or could also work directly with end-user laptops and desktop systems, perhaps replacing all or part of the wired campus backbone.
While there will certainly be some overlap, the two standards have some important differences. 802.11 has wide 20 MHz channels and a MAC that is designed to support tens of users over a relatively small radius of 100-300 meters. (MACs that use more power to attain the 300m limit may be non-standard.) On the other hand, 802.16a allows the operator to control channel bandwidth, and its MAC is designed to support thousands of simultaneous users over a 50 km radius. (This reach has not been demonstrated yet; working products may have a somewhat smaller range.).
The maximum data rate for 802.16 is higher than that of 802.11, partially because it gets nearly twice the number of bits per second from a single Hertz of frequency. In addition, 802.16 offers a variety of QoS choices, while 802.11 supports only best-effort service (with the possible addition of priorities, as in 802.11e).
Because of these options, 802.16a requires more configuration in order to manage the users and the services they receive. The fact that 802.16a supports mesh network topology while 802.11 does not may be more significant to carriers than to enterprise IT managers, given the wide radius of coverage offered by a single 802.16 base station.
Even more important than any of these technical differences are the issues of when the 802.16 standards will be completed and when 802.16 products will become available. Millions of 802.11 NIC cards are being installed today, while 802.16 products will not be available for another twelve to eighteen months. By that time, there will be a very large and significant installed base of 802.11 interfaces in offices and homes. This will provide considerable inertia against any change from 802.11 to 802.16. For the pendulum to swing in the 802.16 direction, there must be significant and compelling benefits for enterprises and individual users to make the switch.
What Does the Future Hold?
As you can see, much care and work have gone into the design of 802.16. Becoming an expert will mean learning many details. However, it is worth understanding at least the rudiments of this technology because it has the potential to revolutionize how companies and carriers design and evolve their networks.
At the end of the day, everyone would like to be able to do more while spending less money, and obviating the need for wires can result in a considerable reduction in infrastructure costs, which means wireless data networking — in its many forms — is clearly here to stay.
Beth Cohen is president of Luth Computer Specialists, Inc., a consulting practice specializing in IT infrastructure for smaller companies. She has been in the trenches supporting company IT infrastructure for over 20 years in a number of different fields, including architecture, construction, engineering, software, telecommunications, and research. She is currently consulting, teaching college IT courses, and writing a book about IT for the small enterprise.
Debbie Deutsch is a principal of Beech Tree Associates, a data networking and information assurance consultancy. She is a data networking industry veteran with 25 years experience as a technologist, product manager, and consultant, including contributing to the development of the X.500 series of standards and managing certificate-signing and certificate management system products. Her expertise spans wired and wireless technologies for Enterprise, Carrier, and DoD markets.