Wireless Home Entertainment, Part II

By Gerry Blackwell

August 29, 2002

Is the fastest wireless technology today ready to bring you audio and video? Even if it is, it may not matter since many product manufacturers and service providers don't believe it.

The idea of home entertainment networking using 802.11 wireless LAN technology sounds great. It might even be great -- once it arrives.

You could watch Sex In The City on one TV while the kids watch a second program piped in over the same satellite or cable service in another room -- transmitted from the home media center or digital gateway via a Wi-Fi WLAN.

You could network PCs and stereo system and stream MP3s stored on PC hard drives to your stereo speakers, or record multiple HDTV programs coming over the satellite service on hard-disk-based PVRs (personal video recorders) in different rooms.

Some WLAN chipset vendors are even suggesting you could stream TV signals over a WLAN from a gateway to a Wi-Fi-equipped PDA or tablet PC. You could set up wireless security cameras and motion sensors outside and stream video back to a PC or TV.

The possibilities and permutations are endless, and with Wi-Fi, you avoid expensive and disruptive cable installations -- which is all great.

But as we saw last time, some analysts believe it will be a few years at least before Wi-Fi home entertainment networks become a mass market proposition -- even though the first cable/satellite set-top boxes with wireless capabilities have already begun to appear, and even though virtually all set-top box and consumer electronics manufacturers have prototypes and many are pilot testing them.

So what's the hold up?

There are a couple. For starters, WLAN technology itself is really not ready for home entertainment networking yet. Raw bandwidth is the issue.

WLAN chipset maker Intersil of Irvine, CA, says consumer electronics manufacturers like Sharp, Sony and Panasonic are saying they need 30Mbps of bandwidth for home entertainment networking to work the way they think it should.

"We asked, 'What the heck do you want that for?'" says Intersil vice president of marketing Chris Henningsen. "They want enough for three channels of CD-quality audio at 1.5Mbps per channel, three of DVD-quality video at 5 to 8Mbps, a couple of Internet browser channels and a couple of 802.11 phone channels. It got up to 30Mbps pretty quickly."

Even allowing for network overhead, 802.11a easily provides all the bandwidth needed. Indeed, WLAN chipset makers specializing in home entertainment networking (firms like Magis Networks of San Diego, CA, and ViXS Systems of Austin, TX) already have 802.11a-based products ready for market.

Raw bandwidth alone isn't enough, though. You need some way of establishing priorities for traffic on the network so that time-sensitive data like video isn't disrupted when some applications hog bandwidth, or when bandwidth between two nodes dips due to propagation issues.

If all you're doing is moving big data files around or browsing the Internet, network congestion on a home LAN isn't that critical. It just takes a little longer for the page to display, the job to print or the file to transfer.

If you're sending an HDTV stream over the home LAN, though, and there isn't enough bandwidth available to relay it from one room to another at the same rate it's coming in from the satellite service or being streamed from the networked DVD player, video and audio quality can seriously degrade.

Equipment vendors understand that consumers will not accept this kind of performance degradation. Instead they'll wait until the technology can guarantee it doesn't happen.

Establishing Quality of Service (QoS) guarantees for time-sensitive applications involves including a priority rating in the header of each IP packet -- higher priority for audio, video and gaming, lower priority for data -- and monitoring and controlling traffic to ensure high-priority packets go through first when bandwidth is at a premium.

Wi-Fi currently does not incorporate any QoS mechanism sufficient to ensure unimpaired audio and video quality. However, a task group of the IEEE (Institute of Electrical and Electronics Engineers) 802.11 committee is currently working on a QoS fix referred to as 802.11e.

The fix involves refining the 802.11 MAC (Media Access Control) layer. The 802.11e group is expected to finalize the new standard by the end of 2002. The first products will likely be available by mid-2003.

The 802.11e protocol will be common to all 802.11 networks -- a, b, g -- and it will be backwards compatible with existing 802.11 WLANs. Users and vendors will supposedly be able to bring existing 802.11 access points up to 802.11e compliance with a simple firmware upgrade for many products.

That may be a reasonable way to proceed in the world of PCs and networking, but consumer electronics and set-top box manufacturers, who are expected to drive the market for home entertainment networking, will likely balk at making a commitment to unfinished technology

"You can't have a new standard come out every year and expect consumer electronics manufacturers to jump on board each time," says Michael Greeson, senior analyst and director of broadband research at Dallas-based market research and consulting firm Parks Associates.

"It's only when the ratification [of 802.11e] is done, only when you have a package of workable standards that the consumer electronics manufacturers will be willing to get behind it."

There is an alternative to waiting. Companies like Magis and ViXS have developed proprietary QoS technologies that work with 802.11a -- that are possibly superior to 802.11e, in fact. However, this means that network equipment built using their partly proprietary chipsets will not be 100-percent compatible with mainstream Wi-Fi products.

This may or may not be an impediment to growing the home entertainment networking market, but Greeson makes it clear that at least some equipment makers, perhaps a majority, will wait for standards.

The technology problems don't end there, according to Intersil. It believes that rivals like Magis and ViXS are making a mistake going ahead with 802.11a technology rather than waiting for 11g.

802.11a has clear advantages in some applications -- public access in an airport, for example -- because it supports more non-interfering radio channels, says Jim Zyren, director of strategic marketing in Intersil's Prism wireless unit.

The fact that 802.11a, which operates in the 5.8 GHz U-NII band, has shorter range, however, makes it a questionable choice for home entertainment networking, where customers will expect to have one access point covering the entire house. Even in medium-size homes, 802.11a may not go far enough, Zyren suggests.

"A lot of [equipment manufacturing] companies believe they'll need the reach and wall-penetrating power of 11g at 2.4 GHz -- which can also provide the same data rates as 11a," he says. "That's why we're optimistic that 11g will be very important in this space."

If 802.11g does turn out to be the protocol of choice for wireless home entertainment networking, that puts the date for availability of equipment with mass market appeal even further out. The 11g protocol has not been ratified yet, and it's not clear when it will be.

Whatever the technological hold-backs, another group of players -- cable and satellite service providers -- aren't all that interested in wireless right now anyway, Greeson says. According to many scenarios, having them along will be crucial to promoting the idea of home entertainment networking.

"We just did a series of interviews with [service providers] and set-top manufacturers," says Greeson. "They're telling us that [home entertainment networking] is not real now and won't be for several years."

Some set-top box manufacturers are also worried that consumers will balk at installing the kind of one-box-does-all device -- a combination digital decoder, PVR, wireless access point and even voice over WLAN bridge -- that some have envisioned.

If the device goes down, too many services would go with it.

Is this pessimism -- or just realism? Next time we'll hear a more optimistic outlook from the leading wireless home entertainment networking chipset maker, Magis Networks of San Diego.

Comment and Contribute
(Maximum characters: 1200). You have
characters left.